BCWSJ - SYNTHITE AC-29-75
- MSDS: BCWSJ
- Manufacturer: JOHN C DOLPH COMPANY
- Product Name: SYNTHITE AC-29-75
- National Stock Number: 5970-00-061-1974
Product Identification
Product ID:SYNTHITE AC-29-75
MSDS Date:01/01/1985
FSC:5970
NIIN:00-061-1974
MSDS Number: BCWSJ
Responsible Party
MONMOUTH JUNCTION, NJ 08852-9513
US
Emergency Phone: 908-329-2333
Cage: DO943
Contractor
Telephone: 908-329-2333
Cage: 72688
Ingredients
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 28%.
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
N-BUTYL ALCOHOL (SARA III)
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: 15.5%
OSHA PEL 100 PPM
ACGIH TLV: S, C 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS: 8030-30-6
RTECS: SE7555000
Fraction By Weight: 4%.
OSHA PEL 100 PPM
LEAD NAPHTHENATE
CAS: 61790-14-5
RTECS: QK9150000
Fraction By Weight: .019%
Hazards
Effects of Overexposure:INHALATION:HI-CONCENTRATION MAY RESULT IN MILD
DEPRESSION RO CONVULSIONS & LOSS OF CONSCIOUSNESS.
First Aid
First Aid:INHAL:REMOVE FROM EXPOSURE IMMEDIATELY-CALL A DOCTOR.START
RESUSCITATION,ADMINISTER OXYGEN IF BREATHING IRREGULAR OR
STOPPED.REMOVE CONTAMINATED CLOTHING & WASH SKIN. FLUSH EYES
W/WATER UNTIL IRRITATI ON STOPS.
Fire Fighting
Flash Point:50 F (ASTM D-56)
Lower Limits:0.9
Upper Limits:6.0
Extinguishing Media:DRY CHEMICAL RECOMMENDED.
Fire Fighting Procedures:THOSE RECOMMENDED FOR FLAMMABLE LIQUIDS ARE
NORMALLY SUITABL
Unusual Fire/Explosion Hazard:NOTE FLASH POINT AND TREAT MATERIAL
APPROPRIATELY.
Accidental Release
Spill Release Procedures:1. IF EXTENSIVE-AVOID BREATHING VAPORS. 2.
CLEAN UP MATERIAL BY MIXING WITH SAND 3. PLACE IN DRUM AND DISPOSE
AS WASTE.
Handling
Handling and Storage Precautions:KEEP CONTAINERS CLOSED.KEEP AWAY FROM
HEAT & OPEN FLAME.USE ONLY WITH ADEQUATE VENTILATION.
Other Precautions:AVOID PROLONGED OR REPEATED BREATHING OF VAPORS OR
SKIN CONTACT.
Exposure Controls
Respiratory Protection:NONE-WITH ADQ.VENTIL;IF >TLV,USE HYDROCARBON
CANISTER.
Ventilation:LOCAL EXHAUST:>60 FPM; MECHANICAL: EXPLOS.PROOF EQUIP.
Protective Gloves:IN HANDS IMMERS
Eye Protection:CHEMICAL DURING POURING
Other Protective Equipment:HYDROCARBON INSOLUBLE APRON WHERE MATERIAL
IS LIABLE TO IMPR
Supplemental Safety and Health
ELECTRICAL INSULAT.SUPPLY-DISTR
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:220
Vapor Pres:7.0
Vapor Density:4.0
Spec Gravity:< 1.
Evaporation Rate & Reference:(BUAC =1) = 1.5
Solubility in Water:< 2
Appearance and Odor:CLEAR,AMBER COLORA; AROMATIC HYDROCARBON ODOR
Percent Volatiles by Volume:50.
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:HEAT & FIRE
Hazardous Decomposition Products:CO & CO*2
Disposal
Waste Disposal Methods:OBSERVE APPROPRIATE LOCAL,STATE,AND FEDERAL
ENVIRONMENTAL ORDINANCES. USE SANITARY LANDFILL IF PERMITTED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.